Standards of Brass & Copper Wire Mesh
Wire Diameter Tolerance:
+0.002mm (0.01-0.099mm)
+0.010mm (0.1-0.99mm)
+0.020mm (1.0-3.0mm)
Mesh / Inch Tolerance:
+0.2mesh (1- 8mesh)
+0.5mesh (10-30mesh)
+1.0mesh(40-60mesh)
+1.5mesh (70-100mesh)
+2.0mesh (110-200mesh)
Width Tolerance:
+5mm for width below 1200mm
Length Tolerance:
-0.10m for length below 30m
Panel Size Tolerance:
-Panel size (mm) x 0.5%
Disc Diameter Tolerance:
+Discs Diameter (mm) x 0.5%
Standards of Phosphor Bronze Wire Mesh
Wire Diameter Tolerance:
+0.002mm (0.02-0.099mm)
+0.010mm (0.1-0.99mm)
+0.020mm (1.0-3.0mm)
Mesh / Inch Tolerance:
+0.2mesh(1-8mesh)
+0.5mesh (10-30mesh)
+1.0mesh(40-60mesh)
+1.5mesh (70-100mesh)
+2.0mesh (110-300mesh)
+3.0mesh (310-400mesh)
Width Tolerance:
+5mm for width below 1200mm
Length Tolerance:
-0.10m for length below 30m
Panel Size Tolerance:
-Panel size (mm) x 0.5%
Disc Diameter Tolerance:
+Discs Diameter (mm) x 0.5%
